When it comes to welding, having the right equipment is key to a successful job. A plasma cutter air filter is an essential part of the welding process, as it helps to ensure that the quality of the weld is maintained and that the air around the work area is clean and safe. The best plasma cutter air filters can provide both perplexity and burstiness in order to ensure optimal performance. By using a combination of advanced technology and durable construction, these air filters can provide superior protection against airborne contaminants while also ensuring an even and consistent flow of air throughout the work area. With this, welders can be confident that their welds will be of top quality and their health will remain uncompromised.
Why Best Plasma Cutter Air Filter Is Necessary?
Plasma cutters use a combination of electricity and compressed air to cut through metal. During the cutting process, dangerous airborne particles are created, including tiny shards of metal, sparks, and smoke. These particles can be hazardous to your health if inhaled over a long period of time. The best plasma cutter air filter is necessary to reduce the number of these particles in the air and make the workspace safer. The air filter also helps keep the machine clean and running efficiently by preventing dust, dirt, and other debris from clogging it up.Comperision Chart for best plasma cutter air filter
3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1/2″ NPT, AUTO DRAIN)
NANPU 1/2″ NPT Industrial Grade 3 Stage Air Drying System – Particulate Filter, Coalescing Filter, Desiccant Dryer & Air Regulator, Metal Bowl, Auto Drain, Suitable for Paint Sprayï¼ Plasma Cutter
Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown
3 STAGE, INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR, PLASMA CUTTER (3/4″ AUTO DRAIN)
Motorguard M-26 Compressed Air Filters, 1/4″ (NPT), Sub-Micronic, Plasma Machines (396-M-26)
3 STAGE HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (1-2 NPT, AUTO DRAIN)
This 3 stage, heavy duty industrial grade filter regulator coalescing desiccant dryer system is perfect for compressed air lines, metal bowls, and great for paint spray and plasma cutter. It is equipped with 1/2″ NPT, industrial rated 3 stage combo water filter/ pressure regulator/ coalescing filter/ desiccant dryer system, with wall mounting bracket and internal float drain (auto drain). This unit will regulate your incoming and outgoing air pressure while removing moisture water, moisture vapor and oil from your compressed air lines, then finally drying out the super clean air with an in-line desiccant air dryer. Why We Like This: It has a 175 PSI max input which helps to regulate your incoming and outgoing air pressure. The 5 micron element helps remove 95% of initial moisture and debris from the compressed air line. The 0.01 micron element removes 99.98% of moisture, moisture vapor and oil that made its way past the first stage filter. The desiccant air dryer dries out super clean air before going downstream to your air tools. It comes with 2 bags of desiccant beads which turn from blue to pink when time to change. Common Questions & Answers: Q: What kind of filter does this unit use? A: This unit uses a 5 micron element in the first stage to remove 95% of initial moisture and debris from the compressed air line, as well as a 0.01 micron element in the second stage which removes 99.98% of moisture, moisture vapor and oil that made its way past the first stage filter. Q: What is the maximum input pressure? A: The maximum input pressure is 175 PSI. Q: Does this unit come with desiccant beads? A: Yes, it comes with 2 bags of desiccant beads which turn from blue to pink when time to change.Additional Product InformationNANPU 1-2 NPT Industrial Grade 3 Stage Air Drying System – Particulate Filter Coalescing Filter, Desiccant Dryer & Air Regulator, Metal Bowl, Auto Drain, Suitable for Paint Sprayï¼ Plasma Cutter
The NANPU 1/2″ NPT Industrial Grade 3 Stage Air Drying System is a great choice for anyone looking for an effective way to clean and dry compressed air. This system includes a particulate filter, coalescing filter, desiccant dryer, air regulator, metal bowl, auto drain and is suitable for paint spray & plasma cutter applications. With its high pressure resistance and excellent safety features, this system provides you with a safe and reliable way to process your compressed air. Why We Like This High Pressure Resistance Works perfectly in the pressure environment of 30-175 psi. High Degree of Safety Excellent metal bowl with visible sight glass in every stage protects you and the system throughout the entire process. Stage 1 Filter & Regulator Compressed air water trap filter equipped with 5 micron element that has excellent filtering performance, much longer life and reuse feasibility to remove most of moisture and particles in the air line. Pressure regulator accurately adjust and stabilize the air pressure. Stage 2 Coalescing Filter Equipped with a 0.01 micron element that can remove 99.9% of moisture, smaller particles and oil, which pass through stage 1 combo. The red indicator will pop up when the filter element needs to be replaced. Stage 3 – Desiccant Air Dryer – Allows the air to be thoroughly dried and cleaned before it enters your pneumatic tools. Desiccant beads need to be added to the metal bowl and when it needs to be replaced, the beads will change from blue to pink. Common Questions & Answers: Q: What is included in this system? A: This system includes a particulate filter, coalescing filter, desiccant dryer & air regulator, metal bowl, auto drain and is suitable for paint spray & plasma cutter applications. It also comes with two 5 micron elements (one of them is installed in the product), two 0.01 micron elements (same as above), four 3.5oz (100g) desiccant beads bag as well as two 1/2″ NPT fittings and one thread seal tape. Q: How does this system protect users? A: This system provides users with high degree of safety due to its excellent metal bowl with visible sight glass in every stage which protect users throughout the entire process from start till end result product is achieved safely . Q: How often should I replace parts? A: The red indicator will pop up when the filter element needs replacing while desiccant beads will change from blue to pink when they need replacing as well .Additional Product InformationLotos LT3500 35 Amp Air Plasma Cutter 2-5 Inch 10 mm Clean Cut, 110V-120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown
The Lotos LT3500 35 Amp Air Plasma Cutter is an excellent choice for home DIY jobs, light duty small business projects, and any other task that requires precision cutting. This machine is powerful yet lightweight, weighing in at 18 lbs for easy portability. It can cut up to 2/5″ (10 mm) metal under maximum output with its 110V/120V input. The pre-installed air filter regulator with NPT quick connector makes setup a breeze, allowing you to quickly connect it to your air compressor using the existing stand coupler. With automatic dual frequency (50/60Hz), 12-35A DC output and a minimum circuit breaker size requirement of 40 AMP at full output (35 AMP/3/8 inch cut), the Lotos LT3500 offers the perfect balance of power and portability. Why We Like This: Powerful yet portable the Lotos LT3500 offers maximum output while only weighing 18 lbs. Quick setup The pre-installed air filter regulator with NPT quick connector allows you to quickly connect it to your air compressor using the existing stand coupler. Input & Output This machine has an input voltage of 110V-125V, 1PH, 50/60Hz @ 40 A and an output of 12-35A DC. It also has a minimum circuit breaker size requirement of 40 AMP at full output (35 AMP/3/8 inch cut). Automatic dual frequency The Lotos LT3500 features automatic dual frequency (50/60Hz). Buy with confidence We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty . US based customer care & support team are always available for help. Common Questions & Answers: Q: What materials can this machine cut? A: The Lotos LT3500 can easily cut up to 2/5(10 mm) metal under maximum output. Q: What is the input voltage? A: The input voltage is 110V-125V, 1PH, 50/60Hz @ 40 A . Q: Is there a warranty? A: Yes! We offer 30 days refund and a 3-YEARS Limited Warranty that includes 1 Year NEW Replacement Warranty.Additional Product InformationHeight | 9 |
Length | 14 |
Width | 5.5 |
3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR, PLASMA CUTTER (3-4 AUTO DRAIN)
The 3 Stage, Industrial Grade In-Line Coalescing Filter & Desiccant Air Dryer Combination with Metal Bowls for Spray Gun Equipment Paint Booth Compressor, Plasma Cutter is the perfect solution for any compressed air application. This combination filter and dryer has 3 stages: a particulate filter/water trap to remove 95% of moisture and debris from compressed air lines, a coalescing filter/oil removing filter to remove 99.98% of moisture, oil and contaminants from your compressed air lines, and a desiccant dryer to take up to 5oz of desiccant beads to thoroughly dry your compressed air lines before the air gets to your pneumatic tools. This combination is perfect for spray or plasma cutter applications as it will ensure that the finished product is clean and free of any contaminants. Why We Like This The three stage filtration process ensures that all contaminants are removed from the compressed air lines. Includes two bags of desiccant beads which will turn from blue to pink when its time to change them. Perfect for spray or plasma cutter applications as it will ensure that the finished product is clean and free of any contaminants. Easy to install and maintain no special tools or expertise required. Comes with metal bowls for added durability. Common Questions & Answers Q: Is this suitable for use with a paint booth compressor? A: Yes, this combination filter and dryer is perfect for use with a paint booth compressor as it will remove 95% of moisture and debris from the compressed air lines before it gets to your pneumatic tools. Q: How often do I need to change the desiccant beads? A: The desiccant beads should be changed when they turn from blue to pink usually every 6 months depending on how much you are using your compressor. Q: What size are the metal bowls? A: The metal bowls are 3/4″ in size which makes them perfect for most spray gun equipment applications.Additional Product InformationMotorguard M-26 Compressed Air Filters 1-4 (NPT), Sub-Micronic, Plasma Machines (396-M-26)
The Motorguard M-26 Compressed Air Filters are a great choice for critical applications like plasma cutters. This filter can mount at the point of use downstream of the Motor Guard M-26/60 filter to remove oil vapor from the air using activated carbon. This is the ultimate final filter for plasma cutters and other critical applications. It has a 1/4″ (NPT) Sub-Micronic connection, making it easy to install and use in your application. The item package weight is only 1.0 lb, making it highly portable and easy to store when not in use. Why We Like This Removes oil vapor from air using activated carbon Easy to install with 1/4″ (NPT) Sub-Micronic connection Highly portable with an item package weight of only 1.0 lb Mounts at point of use downstream of Motor Guard M-26/60 filter The ultimate final filter for plasma cutters and other critical applications Common Questions & Answers Q: What is the size of this filter? A: This Motorguard M-26 Compressed Air Filter has a 1/4″ (NPT) Sub-Micronic connection. Q: How much does this filter weigh? A: The item package weight is 1.0 lb, making it highly portable and easy to store when not in use. Q: What kind of applications is this filter suitable for? A: This Motorguard M-26 Compressed Air Filter is ideal for plasma cutters and other critical applications requiring an ultra-fine final filtration system.Additional Product InformationLength | 0 |
Weight | 0.5 |
Width | 0 |