Why Lights For Traxxas Slash Is Necessary?
There are a few reasons why best lights for traxxas slash is necessary. First, if you are planning on doing any night driving with your Traxxas slash, then you will need some good quality lights. Secondly, even if you don't plan on doing any night driving, it is still a good idea to have some sort of lighting on your truck in case of an emergency. Finally, having some sort of lighting can help you see better when driving in the daytime as well.Our Top Picks For Best Lights For Traxxas Slash
Best Lights For Traxxas Slash Guidance
Front and Rear LED Lights V2 for 1/10 Slash 4×4 2wd ，VXL
LED Lights V2 for 1/10 Slash 4×4 2wd ，VXL: If you're looking to add some extra visibility to your 1/10 Slash 4×4 2wd ，VXL, then LED Lights V2 are a great option. These parts can be mounted directly on the esc or receiver power supply, and they provide a bright, clear light that will help you see your model in low-light conditions. They're also very durable and have a thick cable for higher strength and flexibility.
Common Questions on Front and Rear LED Lights V2 for 1/10 Slash 4×4 2wd ，VXL
• How do I install the Front and Rear LED Lights V2 on my 1/10 Slash 4×4 2wd VXL? Installing the Front and Rear LED Lights V2 is a simple process. First, remove the two screws holding the stock front LED lights in place. Next, take the two new LED light housings and insert them into the openings where the stock LED lights were. Make sure the new LED lights are secured by screwing them in place. Finally, reattach the stock LED light wires to the new LED light posts.• How do I change the color of the Front and Rear LED Lights V2? You can change the color of the Front and Rear LED Lights V2 by unscrewing the back housing of the lights and removing the batteries. Then, simply insert new batteries of the desired color (either red, green, or blue) into the back of the lights.
Why We Like This
• 1. Front and Rear LED Lights V2 for 1/10 Slash 4×4 2wd• 2. VXL it is compatible only with for esc tra xxas VXL 3s
• 3. You should plug it into red connector on the esc.
• 4. input voltage between 6v 8,4v.
• 5. Light give a very realistic look, which will allow to reach a far distance in the night without losing sight of the model.
• 6. thick cable for higher strength and flexibility,made od the highest quality components.
Hobbypark 4 LEDs RC Car Light Headlights Taillight Kit Accessories for Traxxas Slash 4X4 2WD Rustler VXL 4Tec 2.0 Arrma HSP Tamiya Redcat RC4WD Axial SCX10 Truck Tank Crawler(2 Red +2 White)
Hobbypark 4 LEDs RC Car Light Headlights Taillight Kit Accessories for Traxxas Slash 4X4 2WD Rustler VXL 4Tec 2.0 Arrma HSP Tamiya Redcat RC4WD Axial SCX10 Truck Tank Crawler(2 Red +2 White) are the perfect way to make your RC car, truck, tank, or crawler stand out from the crowd! These LEDs are available in two colors, white and red, and are blinding bright! Each light is just the right size to be seen, but not so big that they weigh down your vehicle. The best part about these lights is that they are powered directly by the receiver, so there is no need for batteries. Just plug and play! These lights are also compatible with all kinds of RC cars, trucks, tanks, and crawlers, so you can find the perfect set for your vehicle. Make your RC vehicle stand out from the rest with Hobbypark 4 LEDs RC Car Light Headlights Taillight Kit Accessories!
Common Questions on Hobbypark 4 LEDs RC Car Light Headlights Taillight Kit Accessories for Traxxas Slash 4X4 2WD Rustler VXL 4Tec 2.0 Arrma HSP Tamiya Redcat RC4WD Axial SCX10 Truck Tank Crawler(2 Red +2 White)
• What is the light pattern for the Hobbypark 4 LEDs RC Car Headlights? The light pattern for the Hobbypark 4 LEDs RC Car Headlights is 2 red + 2 white.• What is the voltage for the Hobbypark 4 LEDs RC Car Headlights? The voltage for the Hobbypark 4 LEDs RC Car Headlights is 12 volts.
• What is the wattage for the Hobbypark 4 LEDs RC Car Headlights? The wattage for the Hobbypark 4 LEDs RC Car Headlights is 0.48 watts.
• What is the dimension for the Hobbypark 4 LEDs RC Car Headlights? The dimension for the Hobbypark 4 LEDs RC Car Headlights is 1.97×0.79×0.43 inches.
• What is the weight for the Hobbypark 4 LEDs RC Car Headlights? The weight for the Hobbypark 4 LEDs RC Car Headlights is 0.07 pounds.
Why We Like This
• 4 LEDs for bright and clear lighting• Red and white LEDs for a variety of applications
• 5mm and 3mm LEDs for different purposes
• Compatible with a variety of RC cars
• 1 set included
Additional Product Information
| Height | 0.3 Inches |
| Length | 5.3 Inches |
| Weight | 0.0440924524 Pounds |
RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories
Descending into the darkness, a beam of light pierces the gloom; your faithful RC companion leading the way. The RC Crawler Light Bar Roof LED Lights Kit is the perfect solution for those who want to add a touch of style and pizzazz to their Traxxas Slash, Rustler, Stampede, TRX4, Axial SCX10, Tamiya CC01, HPI, Losi, HSP, Redcat Gen7 Gen8 most rc crawler trucks. Powered by the receiver (May need JST Y Cable), the RC Crawler Light Bar Roof LED Lights Kit is designed for professional players. The super bright light will make your RC rides cool and attractive, while the 146″ cable length ensures that you have plenty of light to see where you're going. Buy with confidence, as we offer free replacement or refund if the light bar has any problem.
Common Questions on RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories
• What is the RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories? The RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories is a LED light kit designed for use on RC cars.• How do I install the RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories? Installation instructions are included with the kit.
• What cars is the RC Crawler Light Bar Roof LED Lights Kit for Traxxas Slash Rustler TRX4 Axial SCX10 Redcat Gen7 Arrma 1/10 Scale RC Car Accessories compatible with? The kit is compatible with the Traxxas Slash Rustler TRX4, Axial SCX10, Redcat Gen7, and Arrma 1/10 Scale RC cars.
• What colors are available
Why We Like This
• 1. Powered by receiver (May need JST Y Cable); don't connect with batteries directly.• 2. Fit for Traxxas Slash, Rustler, Stampede, TRX4, Axial SCX10, Tamiya CC01, HPI, Losi, HSP, Redcat Gen7 Gen8 most rc crawler trucks.
• 3. Working voltage 5V 74V, LED quantity: 12pcs, Weight: 25g / 09 oz, Cable length: 146 in.
• 4. Designed for professional players; Advice you plug it into the 3rd Channel of Receiver; Super bright light to make your RC rides cool and attractive.
• 5. Buy with Confidence: We offer Free Replacement or Refund if the light bar has any problem.
Apex RC Products 56 LED 138mm Aluminum Light Bar Compatible with 1/10 Short Course Trucks, Traxxas Slash, Slash 4X4, TRX-4, Nitro Slash, X-Maxx, Axial Score & Yeti XL #9045L
Are you in need of a light bar that is compatible with the Traxxas Slash, Slash 4X4, Nitro Slash, X-Maxx, TRX-4, Axial Score, and Yeti XL? If so, the Apex RC Products 56 LED 138mm Aluminum Light Bar is just what you need! This light bar is perfect for use with 1/10 short course trucks, as well as many rock crawlers, monster trucks, and short course trucks. The light bar is 138mm long and can be mounted on the roof or hood of your vehicle. It includes 4 screws and bolts to securely mount the light bar in place. With the use of our #9025 (ASIN B07BKSGW3D) electronic switch, the light bar can be turned on and off remotely via the remote (spare channel required). The light bar is powered by a 48V-60V input and can be connected to any spare channel in the receiver. If a channel is not available, a Y-Harness (Apex RC Products #1031) can be used. If installed in a vehicle with a sealed receiver box, we recommend using a 3″ or 6″ (Apex RC Products #1002 or #1006
Common Questions on Apex RC Products 56 LED 138mm Aluminum Light Bar Compatible with 1/10 Short Course Trucks, Traxxas Slash, Slash 4X4, TRX-4, Nitro Slash, X-Maxx, Axial Score & Yeti XL #9045L
• What is the dimensions of the light bar? The light bar is 138mm in length and 56 LEDs.• What is the power source of the light bar? The light bar is powered by 3s LiPo battery or 12v DC source.
• What is the input voltage of the light bar? The light bar has an input voltage of 12v.
• What is the color temperature of the light bar? The light bar has a color temperature of 6000K.
Why We Like This
• 1. This LED light bar is compatible with the Traxxas Slash, Slash 4X4, Nitro Slash, X Maxx, TRX 4, Axial Score, & Yeti XL.• 2. It is also compatible with many 1/10 scale rock crawlers, monster trucks, & short course trucks.
• 3. The light bar is 138mm long & can be mounted at 127mm or 141mm.
• 4. There are 56 super bright LED lights, making it great for running at night or in poorly lit areas.
• 5. The light bar can be powered through any spare channel in the receiver, or with a Y Harness if a channel isn't available.
Red LED Light Kit for RPM Rear Bumper Traxxas Slash 2WD or 4X4 – Apex RC Products #9033
When you're ready to light up your world, the Apex RC Products Red LED Light Kit is the way to do it. This complete light kit comes with everything you need to add super bright LED lights to your RPM RC Products rear bumper for the Traxxas Slash 2WD or 4×4. With this handy light kit, you'll be able to see and be seen, no matter what time of day or night it is.
Common Questions on Red LED Light Kit for RPM Rear Bumper Traxxas Slash 2WD or 4X4 – Apex RC Products #9033
• What is the Apex RC Products #9033? The Apex RC Products #9033 is a Red LED Light Kit for RPM Rear Bumper Traxxas Slash 2WD or 4X4.• What is the light kit made of? The light kit is made of high quality materials that are built to last.
• What are the dimensions of the light kit? The light kit is 3″x3″x2″. • How many lights are included in the kit? The kit includes two lights.
• What is the light output of the kit? The light output is 300 lumens.
Why We Like This
• 1. Super bright LED lights for improved visibility• 2. Compatible with RPM RC Products rear bumper
• 3. Easy to install
• 4. Durable and long lasting
• 5. Adds a unique look to your RC car
Additional Product Information
| Height | 0.2 Inches |
| Length | 5.4 Inches |
| Weight | 0.02 Pounds |
Benefits of Lights For Traxxas Slash
One of the best things you can do to upgrade your Slash is to install a set of high-quality LED lights. Not only will they look great, but they'll also significantly improve your visibility when racing at night. There are plenty of different LED light kits on the market, but we've had good luck with the ones from RC4WD and Pro-Line. Both companies offer several different styles to choose from, so you can pick the ones that best fit your Slash's look. RC4WD's LED light kits come with everything you need for a complete installation, including wiring harnesses and mounting hardware. And if you want even more lighting options, RC4WD also offers separate light bars that can be added to your existing setup. Pro-Line's LED lights are slightly more expensive than RC4WD's, but they offer a few unique features that make them worth the extra money. First off, Pro-Line offers both front and rear facing LEDs in theirlight kits – something that no other manufacturer currently offers.Buying Guide for Best Lights For Traxxas Slash
When you are looking for the best lights for your Traxxas Slash, there are many things that you will want to keep in mind. Here are a few tips to help you choose the right ones: 1. The first thing that you need to consider is the purpose of the lights. Do you want them for purely cosmetic purposes or do you need them for functional purposes as well? This will help narrow down your search and allow you to find the best option for your needs. 2. If you do plan on using the lights functionally, then you will want to make sure that they are bright enough to be seen during the day and at night. You should also make sure that they are waterproof so that they can withstand any weather conditions. 3. Another thing to keep in mind is the size of the light. There are many different sizes available, so you will want to make sure that you select one that will fit onto your Traxxas Slash without any issues. 4. Lastly, price is always a factor when making any purchase and this is no different when it comes to selecting lights for your Traxxas Slash. Make sure to compare prices from various retailers before making your final decision so that you can get the best deal possible!Frequently Asked Question
What are the best lights for a Traxxas Slash?
There is no definitive answer to this question as it depends on personal preference. Some people prefer LEDs while others prefer halogen lights. Ultimately, it is up to the individual to decide which type of light works best for their Traxxas Slash.
What LED light kits are available for a Traxxas Slash?
There are a few different LED light kits available for the Traxxas Slash. Some kits are made specifically for the Slash, while others are made for other Traxxas vehicles but can also be used on the Slash.
What are the benefits of LED lights for a Traxxas Slash?
There are many benefits to using LED lights on a Traxxas Slash. One benefit is that they are much brighter than traditional incandescent bulbs, so they can help you see better when driving at night. Another benefit is that they last much longer than traditional bulbs, so you won't have to replace them as often. Additionally, LED lights generate very little heat, so they won't cause any melting or other damage to the Traxxas Slash's plastic parts.
What are the best places to mount lights on a Traxxas Slash?
There are several different places where you can mount lights on a Traxxas Slash. Some people prefer to mount the lights on the front of the vehicle, while others prefer to mount them on the back. There are also many people who like to mount the lights on the sides of the vehicle.
How do I wire LED lights on a Traxxas Slash?
If you are looking to wire LED lights on your Traxxas Slash, we would recommend reaching out to a local hobby shop or Traxxas dealer for assistance.