Why Load Resistor For Led Tail Lights Is Necessary?
The best load resistor for led tail lights is necessary in order to ensure that your led lights function properly. Without a load resistor, the electrical current passing through the led light will be too high and will cause the light to burn out prematurely.Our Top Picks For Best Load Resistor For Led Tail Lights
Best Load Resistor For Led Tail Lights Guidance
iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
When you install LED turn signal bulbs or LED brake light bulbs, you may find that they flash too fast or “hyper flash.” This is because the LED bulbs draw much less power than the incandescent bulbs they replace. To fix this, you can install load resistors. Load resistors are simply devices that mimic the power draw of an incandescent bulb. When you install them in your car, they tell the turn signal or brake light system that the bulbs are still drawing the same amount of power, so the system doesn't flash any faster. Most load resistors are rated for 50 watts, which is more than enough for even the brightest LED bulbs. You'll need one resistor for each turn signal bulb or brake light bulb. Installing load resistors is easy. Just connect the wires with the splice taps provided. No wire cutting is necessary.
Common Questions on iBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
• What are load resistors and what do they do? Load resistors are devices that are used to correct the electrical current in a circuit. When too much current flows through a circuit, it can cause problems such as flickering or buzzing lights, or in extreme cases, a fire. By connecting a load resistor in series with the circuit, the current is reduced to a safe level.Why We Like This
• 1. 50W 6ohm Load Resistors• 2. 4PCS Quick wire Clip
• 3. Prevent LED Turn Signal Lights or License Plate Brake Lights from hyper flashing
• 4. One resistor is required for each turn signal bulb or each license plate light bulb
• 5. Easy installation
Additional Product Information
| Color | Gold |
| Height | 0.61 Inches |
| Length | 1.97 Inches |
| Weight | 0.05 Pounds |
SYLVANIA – Load Equalizer 27 Watt (at 12.8V) – Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning (Pack of 2)
Sylvania's Load Equalizer prevents hyper-flashing and bulb-out warnings on some vehicles, by balancing the power consumption between your car and newer LED replacement bulbs. The high cooling capacity heat sink of the Sylvania Load Equalizer lowers the surface temperature which is often overheated when LED replacement bulbs are used. The Load Equalizer is best used when replacing your existing headlight bulbs with Sylvania LED replacement bulbs.
Common Questions on SYLVANIA – Load Equalizer 27 Watt (at 12.8V) – Turn Signal Load Equalizer for LED Light Bulbs, Corrects Hyper Flash & Bulb Out Warning (Pack of 2)
• What is the Sylvania Load Equalizer? The Sylvania Load Equalizer is a device that is used to correct hyper flash and bulb out warning when using LED light bulbs.• How does the Sylvania Load Equalizer work? By evenly distributing the load across the circuit, the Load Equalizer corrects the conditions that cause hyper flash and bulb out warning.
• What are the benefits of using the Sylvania Load Equalizer? The Sylvania Load Equalizer provides a safer and more reliable lighting system by correcting the conditions that can cause bulb failure or malfunction.
• How many Sylvania Load Equalizers are needed per vehicle? Two Sylvania Load Equalizers are needed per vehicle – one for the front and one for the rear.
Why We Like This
• Prevents hyper flashing and bulb out warnings• Easy to mount
• Lowers bulb temperature
• For use with most vehicles
• The Sylvania standard of quality
Additional Product Information
| Color | Gold |
| Height | 2.93700787102 Inches |
| Length | 3.12598424878 Inches |
| Weight | 0.2 Pounds |
50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED
If you've ever switched out your standard car bulbs for LED equivalents, you may have noticed a problem with your turn signal lights. Instead of a nice, solid blink, they may flash erratically or not at all. This is because LED bulbs use significantly less power than traditional incandescent bulbs. As a result, your car's turn signal system sees the LED bulbs as if they were burned out and attempts to compensate by blinking faster. Enter the 50W 6Ohm Load Resistor. This little gadget is designed to trick your car's turn signal system into thinking that an incandescent bulb is still installed. As a result, your turn signals will function correctly, without that annoying fast-blinking. The Load Resistor is very easy to install. Simply connect the two wires to the appropriate terminals on your turn signal light bulb. Then, mount the Load Resistor on a metal surface – NOT plastic. Once it's in place, your LED turn signal lights should function properly. Keep in mind that the Load Resistor will get very hot when it's in use. Avoid touching it while your turn signal lights are on. We offer a “2 Years” warranty on our Load Resistors. If you have any questions
Common Questions on 50W 6Ohm LED Load Resistors for 1157 BAY15D LED Turn Signal Lights (Fix Hyper Flash, Warning Cancellor) with 8pcs Quick Wire Clips, especially for 1157 White/Amber Switchback LED
• What is the function of a load resistor? A load resistor is placed in series with a LED to provide the correct current and prevent hyper flashing.• What is hyper flashing? Hyper flashing is when the turn signal flashes at a faster rate than normal, often due to a lower voltage being sent to the bulb.
• What is the difference between a 1157 and a 1157A load resistor? The 1157A has a higher resistance value, which is required for some applications.
• How do I install a load resistor? solder the load resistor to the positive and negative wires of the LED. Then connect the quick wire clips to the corresponding wires of the vehicle.
Why We Like This
• Fixes hyper flash or error codes associated with LED turn signal bulbs• Load resistors are easy to install with no wire cutting necessary
• Load resistors can be mounted on any metal surface
• Load resistors get hot when working, so please don't touch them when the LED light is on
• We offer a “2 Years” warranty on our load resistors
Additional Product Information
| Color | golden |
| Height | 0.8661417314 Inches |
| Length | 1.968503935 Inches |
LivTee 4Pcs 50W 6ohm Load Resistors – Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
As anyone who has ever owned a car with LED turn signal lights can attest, they are subject to “hyper flashing” or “rapid flashing” when first installed. This is because the LED bulbs draw less power than traditional incandescent bulbs, and the car's computer interprets this as a burned-out bulb. 4Pcs 50W 6ohm Load Resistors are placed in-line with the turn signal wires to simulate the extra power draw of a standard turned signal bulb, tricking the car into thinking the LED bulbs are working correctly. Each resistor is rated for 50 watts and 6 ohms, and installation is as easy as connecting the wires with the included splice taps. No wire cutting is necessary.
Common Questions on LivTee 4Pcs 50W 6ohm Load Resistors – Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
• What are load resistors and what are they used for? Load resistors are used to fix LED bulbs that are flashing too fast or have an error code. By connecting the load resistor in series with the LED bulb, the bulb will draw more current and flash at the correct speed.• What are the symptoms of a fast-flashing LED bulb? A fast-flashing LED bulb may have an error code, or it may simply flash too quickly.
• How do you install a load resistor? Load resistors must be installed in series with the LED bulb. To do this, connect one end of the resistor to the positive terminal of the LED bulb, and the other end of the resistor to the negative terminal of the bulb.
• What are the benefits of using a load resistor? Load resistors fix fast-flashing LED bulbs and prevent error codes.
Why We Like This
• 1. 4Pcs 50W 6ohm Load Resistors• 2. 4pcs Quick wire Clip
• 3. Prevent LED Turn Signal Lights or LED License Plate Lights from hyper flashing, malfunction or trigger warning message on dashboard
• 4. Load Resistors heat up like light bulbs and get super HOT when working
• 5. Easy installation
Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors
Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors (Set of 2 bulbs) are all in one error free light bulbs that will not hyper flash and do not require extra resistors. These bulbs are made with high power led chips that make them 4 times brighter than standard bulbs. They are also designed with a non-polarity design which makes them compatible for both CK/SRCK and Standard sockets. In addition, they have a built in Constant Current IC for longer life span and low power consumption.
Common Questions on Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulbs DRL Parking Lamp No Hyper Flash All in One With Built-In Resistors
• What is the Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulb? The Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulb is a type of LED light bulb that is designed to be used in brake lights, turn signals, and tail lights. It is also suitable for use as a daytime running light (DRL) or parking light. This particular light bulb is equipped with built-in resistors to prevent hyper flashing.• What are the benefits of using a Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulb? Some benefits of using this type of LED light bulb include the following: (1) it is much brighter than a standard incandescent light bulb, (2) it uses less energy, (3) it emits very little heat, (4) it has a longer lifespan, and (5) it produces little to no electromagnetic interference (EMI). • How do I install a Syneticusa 3157 Error Free Canbus Ready Red LED Brake Parking Tail Stop Turn Signal Light Bulb?
Why We Like This
• 1. Error free light bulbs• 2. Will not hyper flash
• 3. No extra resistors needed
• 4. High power LED chips
• 5. Built in constant current IC
Additional Product Information
| Color | red |
Benefits of Load Resistor For Led Tail Lights
While LED lights are becoming more and more popular for taillights, there are still many benefits to using a best load resistor for LED tail lights. One of the main benefits is that it helps to protect your vehicle's electrical system from damage.Buying Guide for Best Load Resistor For Led Tail Lights
When choosing a load resistor for your LED tail lights, there are several factors to consider. The most important factor is the voltage of your vehicle's electrical system. Most load resistors are designed for 12 volt systems, but there are some that can handle 24 volt systems. If you are not sure what voltage your vehicle's electrical system is, consult your owner's manual or a qualified mechanic. Next, you need to determine the wattage rating of the load resistor. This is usually listed in watts (W). The wattage rating should be high enough to handle the current draw of your LED tail lights. If it is not, the load resistor will overheat and potentially damage your taillights or cause problems with your vehicle's electrical system. Finally, you need to decide how many load resistors you need. This will depend on how many LEDs are in your tail light assembly and how bright they are. A good rule of thumb is to use one watt of power for every three LEDs. So, if your tail light has nine LEDs, you would need a three-watt resistor. When installing load resistors, it is important to follow the manufacturer's instructions carefully. In most cases, they must be connected in parallel with the LED circuits (one side of the resistor to one side of the circuit and the other side of the resistor to the other side of the circuit). Failure to do this could result in damage to your taillights or electrical system.Frequently Asked Question
What is the best load resistor for LED tail lights?
The best load resistor for LED tail lights is one that is able to handle the amount of current flowing through the LEDs. If the load resistor is too small, it will overheat and potentially damage the LEDs. If the load resistor is too large, it will be a waste of energy. The size of the load resistor will depend on the number and type of LEDs used, as well as the voltage of the vehicle's electrical system.
What are the benefits of using a load resistor for LED tail lights?
A load resistor is used to provide the proper current to an LED tail light. Without a load resistor, the LED would not receive enough current and would not light up.
How do I install a load resistor for LED tail lights?
There are a few different ways to install a load resistor for LED tail lights. One way is to solder the resistor directly to the LED tail light. Another way is to splice the resistor into the tail light wire.
What are some of the best load resistor brands for LED tail lights?
There are many brands that make load resistors for LED tail lights, but some of the best include Putco, Grote, and Peterson. These brands offer high-quality products that will ensure your LED tail lights function properly.
How do I troubleshoot a problem with my LED tail lights?
If your LED tail lights are not working, the first step is to check the fuse. If the fuse is blown, replace it with a new one. If the fuse is not blown, check the bulbs. If one of the bulbs is burned out, replace it with a new one. If the bulbs are not burned out, check the wiring. If the wiring is damaged, you will need to repair or replace it.