Why Payne Furnace Flame Sensor Is Necessary?
Best payne furnace flame sensors are necessary to ensure the safe and efficient operation of your furnace. Aflame sensor helps to monitor the burning of fuel in the furnace and ensures that the flame is extinguished if it gets too low. This prevents dangerous conditions such as carbon monoxide poisoning.Our Top Picks For Best Payne Furnace Flame Sensor
Best Payne Furnace Flame Sensor Guidance
Poweka LH680014 LH680534 Flame Sensor Replacement Compatible with Carrier Bryant Payne Day & Night Furnace LH33WZ511 LH33WZ515
If you're looking for a replacement flame sensor for your Carrier, Bryant, Payne, or Day & Night furnace, look no further than the Poweka LH680014 LH680534 Flame Sensor. This direct replacement for the LH680534, LH680012, and LH33WZ511 flame sensors is made of high quality materials and is designed to withstand temperatures up to 1800F. With a ceramic length of 1-1/2″ and a male quick connect terminal, this flame sensor is a perfect fit for your furnace.
Common Questions on Poweka LH680014 LH680534 Flame Sensor Replacement Compatible with Carrier Bryant Payne Day & Night Furnace LH33WZ511 LH33WZ515
• What is the model number of the replacement flame sensor for the Carrier Bryant Payne Day & Night furnace? The model number of the replacement flame sensor is LH680014 LH680534.• What is the compatible with Carrier Bryant Payne Day & Night furnace? The replacement flame sensor is compatible with Carrier Bryant Payne Day & Night furnace LH33WZ511 LH33WZ515.
• How do you install the replacement flame sensor? Installation instructions are included with the replacement flame sensor.
Why We Like This
• Replaces Part Number LH680534, LH680012, LH680014, LH33WZ511, LH33WZ515, and LH33WZ517• Direct Replacement for Compatible with Carrier Bryant Day & Night Payne
• Used on these Compatible with Bryant & Carrier models: 330AAV, 330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC, 58SXC, 58TUA and 58WAV
• High quality alumina ceramic insulator, High temperature kanthal flame rod material that can withstand 1800F
• Ceramic Length 1 1/2″ 1/4″ Male Quick Connect Terminal with 4 3/4″ Wiring Harness,Bent Flame Sensor 73 Degree Bend Angle
Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH680534
When your furnace is having trouble igniting, it could be due to a faulty flame sensor. The Duralight Furnace Flame Sensor is a direct replacement for the Carrier Bryant Payne Day & Night LH680534, and it comes with a two year replacement warranty. This sensor has a bent flame angle of 73 degrees and a ceramic length of 1-1/2″. It also has a 1/4″ male quick connect terminal with 4-3/4″ wiring harness.
Common Questions on Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH680534
• What is the Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH680534? The Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH680534 is a replacement part for your furnace.• What does the Duralight Furnace Flame Sensor Direct Replacement do? The Duralight Furnace Flame Sensor Direct Replacement senses the flame in your furnace and signals the control board to turn on or off the gas flow accordingly.
• Why would I need to replace my Duralight Furnace Flame Sensor Direct Replacement? You may need to replace your Duralight Furnace Flame Sensor Direct Replacement if it is not functioning properly or if it is damaged.
• How do I replace my Duralight Furnace Flame Sensor Direct Replacement? To replace your Duralight Furnace Flame Sensor Direct Replacement, firstturn off your furnace and disconnect the power. Next, remove the access panel and locate the old sensor. Then, disconnect the old sensor and remove it. Finally, install the new sensor by connecting it and replacing the access panel.
Why We Like This
• • Two Year Replacement Warranty• Bent Flame Sensor 73 Degree Bend Angle
• Ceramic Length 1 1/2″• 1/4″ Male Quick Connect Terminal with 4 3/4″ Wiring Harness
• Direct Replacement For Carrier Bryant Day & Night Payne Part Numbers LH680534, LH680012, LH680014, LH33WZ511, LH33WZ515, and LH33WZ517
OEM Upgraded Replacement for Payne Furnace Flame Sensor LH33WZ516
When your furnace's flame sensor goes bad, it can be a real pain. The furnace will light for several seconds and then turn back off on the flame sensor safety. This can be a frustrating experience, especially if you're not sure what's causing the problem. There are a few different reasons why your furnace's flame sensor might go bad. One possibility is that the sensor is just dirty. Over time, dirt and dust can build up on the sensor, preventing it from accurately detecting the presence of a flame. If this is the case, you can try cleaning the sensor with a cotton swab or a soft cloth. Another possibility is that the flame sensor is simply worn out. Like any other part of your furnace, the sensor is subject to wear and tear over time. If it's been a while since you've replaced the sensor, it might be time to do so. If you're not sure what's causing the problem, it's best to call a professional. A qualified technician will be able to diagnose the problem and recommend the best course of action.
Common Questions on OEM Upgraded Replacement for Payne Furnace Flame Sensor LH33WZ516
• What are the dimensions of the Payne Furnace Flame Sensor LH33WZ516? The dimensions of the Payne Furnace Flame Sensor LH33WZ516 are 3.5″ x 1.75″ x 1″. • What is the voltage of the Payne Furnace Flame Sensor LH33WZ516? The voltage of the Payne Furnace Flame Sensor LH33WZ516 is 120 volts.• What is the amperage of the Payne Furnace Flame Sensor LH33WZ516? The amperage of the Payne Furnace Flame Sensor LH33WZ516 is 0.5 amps.
• What is the warranty of the Payne Furnace Flame Sensor LH33WZ516? The warranty of the Payne Furnace Flame Sensor LH33WZ516 is 5 years.
• How often should the Payne Furnace Flame Sensor LH33WZ516 be replaced? The Payne Furnace Flame Sensor LH33WZ516 should be replaced every 5 years.
Why We Like This
1) OEM Upgraded Replacement for Payne Furnace Flame Sensor LH33WZ516 2) Brand New Furnace Flame Sensor 3) When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety 4) Prevents your furnace from relighting the pilot light too often 5) Saves you money on your energy billAdditional Product Information
| Height | 6 Inches |
| Length | 6 Inches |
LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector
If your furnace isn't igniting, it could be due to a faulty flame sensor. The flame sensor is a small rod that protrudes into the combustion chamber and senses when the flame is present. If the sensor is not working properly, the furnace will not ignite. Replacing the flame sensor is a relatively easy job that any homeowner with a 1/4 drive screwdriver can do. This flame sensor is a direct replacement for the following models: – Carrier Bryant Payne With LH33ZS004 igniter – LH33WZ511 – LH33WZ515 – LH680012 – LH680014 This sensor is made of high quality alumina ceramic and kanthal wire that can withstand temperatures up to 1800°F. It is also corrosion resistant.
Common Questions on LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector
• What is the model number of the LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector? The model number is LH680014.• What is the width of the LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector? The width is 0.39 inches.
• What is the height of the LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector? The height is 2.87 inches.
• What is the weight of the LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH33WZ511 LH33WZ515 LH680012 with Wire Connector? The weight is 0.05 pounds.
• What is the wire connector used for the LH680014 Flame Sensor 45° Replacement Compatible with Carrier Bryant Payne Furnace LH
Why We Like This
• PFS014 Flame Sensor 45 Degree Angle with Wire Connector• This is Non Original Aftermarket Parts
• Replaces Part Number LH33WZ511, LH33WZ515, LH680012, LH680014
• Compatible with Carrier, Bryant, Payne With LH33ZS004 igniter
• Compatible with Bryant & Carrier models: 330AAV, 330JAV, 333BAV, 333JAV, 398AAV, 58DHC, 58DXC, 58PAV, 58SSC, 58SXC, 58TUA and 58WAV
• Anti high temperature,Corrosion resistance
• High quality alumina ceramic insulator
• High temperature kanthal flame rod material
• Can withstand 1800°F
• Easy to install
• A job any homeowner with a 1/4 drive screwdriver can do
Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH33WZ516
When your furnace isn't heating correctly, one possible issue is a dirty or damaged flame sensor. The Duralight Furnace Flame Sensor is a direct replacement for Carrier, Bryant, Payne, Day & Night, and other models. It's an easy way to keep your furnace running smoothly and efficiently. Simply remove the old sensor and install the new one – no wiring or complex installation required. Plus, with a two-year replacement warranty, you can be sure that you're getting a quality product.
Common Questions on Duralight Furnace Flame Sensor Direct Replacement For Carrier Bryant Payne Day & Night LH33WZ516
• What is a Duralight Furnace Flame Sensor? A Duralight Furnace Flame Sensor is a direct replacement for the Carrier Bryant Payne Day & Night LH33WZ516.• What are the dimensions of the Duralight Furnace Flame Sensor? The Duralight Furnace Flame Sensor has the following dimensions: 3.5″ x 1.5″ x 1″. • What is the purpose of the Duralight Furnace Flame Sensor? The Duralight Furnace Flame Sensor is used to sense the presence of a flame in the furnace and to signal the furnace to shut down if no flame is present.
• Where is the Duralight Furnace Flame Sensor located? The Duralight Furnace Flame Sensor is located in the flame zone of the furnace.
• How often should the Duralight Furnace Flame Sensor be replaced? The Duralight Furnace Flame Sensor should be replaced every 3-5 years.
Why We Like This
• 1. Duralight Two Year Replacement Warranty• 2. Straight Flame Sensor With 1/4″ Male Quick Connect Terminal and 4 3/4″ Wiring Harness
• 3. Overall Length 4 3/4″ (Not Including Electrical Terminal)• 4. 4″ From Mounting Flange to Tip Ceramic Length 1 1/2″• 5. Replaces Carrier Bryant Payne Day & Night Part Numbers LH680013, LH33WZ514, and LH33WZ516
Benefits of Payne Furnace Flame Sensor
A furnace flame sensor is a very important part of your furnace. This small piece ensures that your furnace will operate properly and safely. A well-maintained and functioning flame sensor will save you money on repairs, improve the efficiency of your furnace, and most importantly, keep your family safe. When a gas burner ignites, the tiny electrical current generated by the igniter should cause the Flame Sensor to create a small magnetic field. The presence of this magnetic field completes an electrical circuit between two contact points (thinner wires) inside the Flame Sensor switch, allowing electricity to flow through to the Gas Valve coils and open them. This sequence starts up your furnace when you set its thermostat to “heat†mode. During Furnace operation, if something interrupts this process so that electricity does not flow continuously through all three sets of coils (two in thw Gas Valve plus one in Inducer Fan), then one or more safeties shut down power to prevent potentially dangerous conditions such as accumulation of unburned gas in Furnace chamber or over-heating due to insufficient airflow over heat exchanger(s). These events are called Lockouts because they “lock” off power until someone comes along and resets things manually – usually by pushing a button on front control panel after finding out what went wrong and addressing any issues that caused problem in first place.Buying Guide for Best Payne Furnace Flame Sensor
Looking for the best payne furnace flame sensor? Here are a few things to keep in mind when shopping for one: 1. Make sure the sensor is compatible with your furnace model. 2. Check the reviews to see what other people have said about the performance of the sensor. 3. Choose a sensor that is easy to install and replace.Frequently Asked Question
What is the best Payne furnace flame sensor for your furnace?
There is no one-size-fits-all answer to this question, as the best Payne furnace flame sensor for your furnace will depend on a number of factors, including the model and age of your furnace, the type of fuel it uses, and your personal preferences. That said, some of the most popular Payne furnace flame sensors include the Payne PFSS-PFTN-3 Flame Sensor and the Payne PFSS-PFTN-4 Flame Sensor.
What is the function of a furnace flame sensor?
A furnace flame sensor is a safety device that is used to detect the presence of a flame in the furnace. The flame sensor is used to turn the furnace off if the flame goes out.
Why is it important to keep your furnace flame sensor clean?
It is important to keep your furnace flame sensor clean because it is responsible for detecting whether or not there is a flame present. If the sensor is dirty, it may not be able to accurately detect whether or not a flame is present and this could lead to the furnace shutting off when there is actually a flame present.
How do you know if your furnace flame sensor needs to be replaced?
If your furnace isn't igniting, the first thing you should check is the flame sensor. A dirty or damaged flame sensor can prevent the furnace from igniting.
How often should you check or replace your furnace flame sensor?
Most manufacturers recommend checking or replacing your furnace flame sensor every one to three years.